एकीकृत कीट प्रबंधन के बुनियादी उपकरण
Cultural practices
Cultural methods of pest control consist of regular farm operations in such a way which either destroy the pests or prevent them from causing economic loss. The various cultural practices have been grouped as under.
- Preparation of nurseries or main fields free from pest infestation by removing plant debris, trimming of bunds, treating of soil and deep summer ploughing which kills various stages of pests. Proper drainage system in field is to be adopted.
- Testing of soil for nutrients deficiencies on the basis of which fertilizers should be applied.
- Selection of clean and certified seeds and treating seeds with fungicide or biopesticides before sowing for seed borne disease control.
- Selection of seeds of relatively pest resistant/tolerant varieties which play a significant role in pest suppression.
- Adjustment of time of sowing and harvesting to escape peak season of pest attack.
- Rotation of crops with non-host crops. It helps in reduction of incidence of soil borne diseases.
- Proper plant spacing which makes plants healthier and less susceptible to pests.
- Optimum use of fertilizer. Use of FYM and bio-fertilizers should be encouraged.
- Proper water management (alternate wetting and drying to avoid water stagnation) as the high moisture in soil for prolonged period is conducive for development of pests especially soil borne diseases.
- Proper weed management. It is well known fact that most of weeds besides competing with crop for micronutrients also harbour many pests.
- Setting up yellow pan sticky traps for white flies and aphids at far above canopy height.
- Synchronized sowing. Here, community approach is required to sow the crops simultaneously in vast area so that pest may not get different staged crops suitable for its population build up. If pest appears in damaging proportion, control operation could also be applied effectively in whole area.
- Growing trap crops on the borders or peripheries of fields. There are certain crops which are preferred more by a pest species. These are known as trap crops for that pest. By growing such crops on the border of the fields, pest population develop there which can be either killed by using pesticides or its natural enemies are allowed to develop there for natural control.
- Root dip or seedling treatment in pest infested area.
- Inter-cropping or multiple cropping wherever possible. All the crops are not preferred by each pest species and certain crops act as repellents, thus keeping the pest species away from preferred crops resulting in reduction of pest incidence.
- Harvesting as close as to ground level. This is because certain developmental stages of insect pests/diseases remain on the plant parts which act as primary inoculum for the next crop season. Hence, harvesting crops at ground level will lessen the incidence of pests in next season.
- Before planting, nursery plants could be sprayed/dipped in copper fungicide/biopesticide solutions to protect the plants from soil borne diseases.
- While pruning fruit trees remove crowded/dead/broken/diseased branches and destroy them. Do not pile them in the orchards which may act as source of pest infestation.
- Large pruning wounds should be covered with Bordeaux paste/paint to protect the plants from pest/disease attack.
- For excellent fruit set, pollinizer cultivars should be planted in required proportion in the orchards.
- Keeping bee hives or placing flower bouquets of pollinizer cultivars facilitate better pollination and subsequent fruit set.
Mechanical practices
- Removal and destruction of egg masses, larvae, pupae and adults of insect pests and diseased parts of plants wherever possible.
- Installation of bamboo cage cum bird perches in the field and placing parasitized egg masses inside them for conservation of natural enemies and withholding of pest species wherever possible.
- Use of light traps and destruction of trapped insects.
- Use of rope for dislodging leaf feeding larvae e.g. caseworm and leaf folders.
- Installation of bird scarer in the field where required.
- Installation of bird perches in the field for allowing birds to sit and feed on insects and their immature stages viz., eggs, larvae and pupae.
- Use of pheromones for mating disruption, monitoring pest levels and mass trapping.
Genetic practices
Selection of comparatively pest resistant/tolerant varieties with reasonable yield levels
Regulatory practices
In this process, regulatory rules framed by Govt. are brought into force under which seeds and infested plant materials are not allowed to enter the country or from one part to other parts of the country. These are known as quarantine methods and are of two types i.e. domestic and foreign quarantine.
Biological practices
Biological control of insect pests and diseases through biological means is most important component of IPM. In broader sense, biocontrol is use of living organisms to manage crop damaging living organisms (pests). Some of the common biocontrol agents are
1. Parasitoids
These are the organisms which lay eggs in or on the bodies of their hosts and complete their life cycles on host bodies. As a result of this, the hosts die. A parasitoid may be of different type like egg, larval, pupal, adult, egg-larval and larval pupal parasitoids etc depending on the host developmental stage in or on which it completes its life cycle. Examples of some organisms species are of Trichogramma, Apanteles, Bracon, Chelonus, Brachemeria, Pseudogonotopus etc.
2. Predators
These are free living organisms which prey upon other organisms for their food. Examples are different species of spiders, dragon flies, damsel flies, lady bird beetles, Chrysopa species, birds etc.
3. Pathogens
These are micro-organisms which infest and cause diseases in their hosts as a result of which hosts are killed. Major groups of pathogens are fungi, viruses and bacteria. Some nematodes also cause diseases in some insect pests.
- Important examples of fungi: different species of Hirsutella, Beauveria, Nomurae and Metarhizium
- Among viruses, most important examples are of nuclear polyhedrosis virus (NPV) and granulosis viruses.
- Among bacteria, Bacillus thuringiensis (B.t.) and B. popillae are very common examples.
Biological control
Disease causing agents of pests can be mass multiplied in the laboratory at a low cost in liquid or powdered formulations. These formulations are called biopesticides and can be sprayed like ordinary chemical pesticides. The different types of biocontrol practices are grouped as under:-
1. Introduction
In this process, a new species of bioagent is introduced into a locality for its establishment against its host. This is done only after thorough laboratory examination and field trials for its efficacy.
2. Augmentation
In this process, the population of natural enemies already present in the area is increased. This is done by releasing either laboratory reared or field collected bioagents. The released bioagents are of same species in such number as would require to suppress the pest population in that area.
3. Conservation
This is most important component of biological control and plays a major role in pest suppression. In this process, natural enemies present in the nature are protected from being killed. The different practices required to protect the natural enemies are as below.
- Collection of parasitised egg masses and placing them in bamboo cage-cum-bird perches for allowing emergence of parasitoids and withholding of pest larvae.
- Awareness to differentiate pests and defenders and sparing the defenders during field sprays.
- Chemical spray should be adopted as last resort and that too after observing pest defender ratio and economic threshold level (ETL).
- Use of broad spectrum pesticides should be avoided.
- Only selective and relatively environmental friendly (REF) pesticides should be used where necessary.
- As far as possible strip or spot application of pesticides is to be carried out.
- Adjustment of time of sowing and harvesting to avoid the peak season of pest attack.
- Growing trap crop on the borders of main fields before the actual sowing of crop to trap pest and develop natural enemies.
- Root dip/seedling treatment for gall midge prone area.
- Crop rotation and inter-cropping also help in conservation of defenders.
- If pesticides are used, only recommended dose and concentration is to be used.
Chemical practices
Use of chemical pesticides is the last resort when all other methods fail to keep the pest population below economic loss. Use of pesticides should be need based, judicious, based on pest surveillance and economic threshold level (ETL). This helps minimise not only the cost involved, but also to reduce associated problems. While going for chemical control, we must understand thoroughly what to spray, when to spray, where to spray and how to spray, keeping in mind the following points.
- ETL and pest defender ratio must be observed
- Relatively safer pesticides should be selected e.g. neem based and biopesticides.
- If pest is present in strips or isolated patches, whole field should not be sprayed.
Relevance of IPM practices is more important in vegetable and fruit crops because of their unique mode of consumption by human being. Pesticides which are generally highly toxic and are known to have toxic residual effects should not be recommended off hand.
To get more profit, farmers do not wait until waiting periods of pesticides and harvest the crop to market the same. This leads to pesticides poisoning, chronic effects, in some cases even deaths. Thus, we have to be more careful and cautious in applying pest control practices in field crops.
Authors:
Dr. Daya Shankar Meena, Rajendra Kumar and Vimal Singh Rajput
Entomology Department, COA, SKRAU, Bikaner-334006
Email: